You asked: What is a blind stitch foot used for?

The blind stitch foot has a guide that runs down the middle of the foot. Most commonly, this foot is used to make a blind hem on the bottoms of pants, curtains, etc.

Do I need a blind stitch foot?

A blind hem should be used where you require a wider hem with an invisible finish on the right side of the garment. If you have a round hem or are using a really thick fabric, you would be best to use bias tape to finish your hem rather than a blind stitch hem.

Why is blind stitch appropriate as hemming stitch?

Blind hems are fantastic. Using an ingenious method of folding and stitching, you can create a machine stitched hem that is nearly invisible from the outside. It’s a fantastic way to create a deep hem on a skirt, unlined jacket, or pants.

Can you use a blind hem foot for topstitching?

With the blind hem foot I can adjust the needle a bit to get different distances away from the edge but this is also somewhat limited. Ever since I started using these feet to do my topstitching I’m much happier with the results. The edge of the fabric is placed next to to the guide of the blind hem foot.

What Stitch is best for hemming?

Use a zigzag or mock overlock stitch to sew along the raw edge of your hem. A good zigzag option for a single layer of fabric is the three step zigzag.

IT IS INTERESTING:  Is muslin fabric good for embroidery?

Can you do a blind stitch on a sewing machine?

Set your machine on the blind hem stitch and use an average stitch length, between a 2 and a 3. Slide in the fabric wrong side up, and put the foot’s plastic straight edge guide right up against the fold. … When you’re done, if you use matching thread the hem will be invisible from the right side!

What does blind stitch mean?

(Entry 1 of 2) : a sewing stitch so made as to be invisible on the right side and often nearly invisible on the wrong side.

Needlewoman