If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.
Why is my bobbin not moving?
My Bobbin Moves Slowly Or Gets Stuck
This usually happens if there is grease and dust build up in the bobbin compartment. It can also occur if the bobbin thread is not attached correctly, the thread has formed a knot or a problem with the bobbin case.
Why is my sewing machine not catching?
The biggest culprit of the needle hitting the bobbin case is if the bobbin case is not placed correctly. The biggest reason that this could be is if you did not put everything back properly after cleaning your sewing machine. If this is the case, you will want to make sure that everything is put back together properly.
Why is my bobbin thread coming through?
If the bobbin thread is on top, that means the top thread is pulling more, or, has more tension. That means either the top thread is too tight or the bobbin thread is too loose.
What is wrong with my bobbin thread?
There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.
How do you fix a bobbin problem?
How to Fix Bobbin Thread Bunching and Other Threading Problems
- Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
- Change the Needle. …
- Inspect the Bobbin. …
- Clean the Machine.
Is the bobbin case supposed to move?
THe bobbin will move a bit as you sew but don’t expect it to spin wildly. Seems counterintuitive, but that’s how they do it. Now about “raising the bobbin thread”. It means the bobbin thread needs to come up through the little hole under the presser foot.
Why won’t my sewing machine needle go up and down?
A disengaged clutch, broken drive belt or internal drive gear failure can prevent the needle from moving. Engage the hand wheel clutch if you have it disengaged for bobbin winding. If the needle won’t move with the clutch engaged, unplug the sewing machine and check the drive belt.
Why is my bottom stitch looping?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Why does my sewing machine keep jamming?
1 5 Reasons Why Your Sewing Machine Keeps Jamming: 1.1 Lack of tension on the upper thread. 1.2 Your machine is clogged at some point or place. 1.3 The needle is deformed or broken.
Where does the bottom bobbin thread go?
Once you have a wound bobbin, it goes in the machine’s bobbin case to supply the lower thread as your machine sews. To load your bobbin, lift your needle and presser foot to the highest position (your machine will either use a hand wheel or a button for this) and remove the bobbin cover.
Are all Singer Bobbins the same?
Bobbin Tips & Hints
Use only bobbins that are the same class/style as those that come with your machine – don’t substitute! SINGER® branded bobbins are recommended for best results.