The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
What should my stitch tension be?
Remember, most tension discs close when the presser foot is down, so be sure to thread the machine with a raised foot. A good habit is to put the spool on the machine, and pull out 18 inches of thread.
Why is my zigzag stitch sewing straight?
If the upper thread appears as a single line, the lower thread is incorrectly threaded. Instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up.
How do you adjust the tension on a zig zag stitch?
Zig zag stitch can be adjusted by changing the settings on the machine. A higher number on your stitch length makes the zig-zag longer and the width dial will indicate the width of the stitch and change it to wider or narrower.
Why is my bottom stitch not straight?
If your thread is pulled tight on the underside and not forming an even stitch then (counter-intuitively) it’s usually the top thread tension that’s wrong. Sometimes very lightweight fabrics such as sheers can get dragged down into the machine so it’s a good idea to use a straight stitch plate.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
Is a zigzag stitch stronger than a straight stitch?
Though straight stitch is considered as the strongest stitch, zigzag is one of the most durable stitches. There are ways in which you can make the hold stronger. For instance, the triple zigzag is stronger compared to the ordinary zigzag ones.
When would you use a zig-zag stitch?
The Zig-Zag Stitch is a very versatile stitch. Use it for seam finishing, applique, bartacks, satin stitching and more. For some sewing techniques with this stitch, it can be helpful to use a Satin Stitch Foot to help prevent the fabric from puckering.
What settings should my sewing machine be on?
Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.
What is a 3 step zigzag stitch?
Three-step zigzag: When used on the widest width, the ordinary zigzag stitch pulls the fabric into a tunnel and the fabric rolls under the stitch — not very desirable. … The needle takes three stitches to one side and then three stitches to the other side, keeping the fabric flat and tunnel-free.
Why is my zigzag stitch not catching?
Try some of the simple things first. Remove the bobbin plate using a screwdriver and then remove the bobbin. Clean out any lint that may be under the bobbin and which may cause your zigzag stitch not to work. Replace the bobbin and the bobbin plate and test your zigzag stitch.
When should I adjust the tension on my sewing machine?
When lower tension is too loose (or upper tension is too tight), knot is visible on right side (left). When upper tension is too loose (or lower tension is too tight), knot is visible on wrong side (right). Tensions can still need adjustment even if they’re balanced.