Sew with a stretch stitch or a zigzag stitch, which will stretch along with the elastic. Finish the hem of the garment, if applicable. Mark the seam allowances at the sides of the garment piece. Fold the fabric between the marks into four equal sections.
How do you sew in elastic?
How to sew elastic to fabric
- Measure and pin to divide your fabric into quarter sections. Mark your elastic into quarters in the same way.
- Pin the end of your elastic to the end of your fabric and stitch to secure. Pull the elastic tightly and pin the next section of elastic to the next pin on the fabric.
How do you sew elastic by hand?
When all your elastic is within the casing, stitch together the two marked ends of the elastic by hand. Pull the ends of the elastic into the hem and make sure that they fit appropriately. Stitch down the opening on the casing to complete your fabric or cloth. You have now finished sewing elastic using a casing.
Why won’t my sewing machine sew elastic?
You may be using the right technique of stretching the elastic as you sew, but you may have the wrong kind of elastic. All elastics are definitely not equal. Or, you may be using too short a stitch or stretching the elastic too much or not have the right kind of elastic for the fabric you are using, etc.
How can I add elastic to the bottom of my pants?
To work the elastic into the hem, insert the closed safety pin into the opening in your pant leg hem. Then, begin to work the elastic through the hem using the safety pin to move it along. You will have to work slowly and move the safety pin through the hem just a little at a time.
Can you cut elastic in half lengthwise?
As a result, many people are asking if they can cut elastic lengthwise – i.e. “Can I cut 1/2″ elastic in half to make 1/4″ elastic?” I do not recommend cutting elastic in half lengthwise, it almost always makes the elastic fray and/or lose integrity. Instead, I’d suggest using jersey knit fabric to make mask ties.
How much elastic do you need for a waistband?
The elastic for a waistband should be approximately 2″ smaller than your waist measurement.
What is the difference between braided and knitted elastic?
Braided elastic is best used inside of casings. Knit elastic is a soft, lightweight elastic that can be used directly against the skin. It does not narrow when stretched. … Knit elastic is best with light- to medium-weight fabrics, and can be used inside of casings or stitched directly to fabrics.
Why does my thread bunch when sewing elastic?
When sewing, the top, and bottom stitches should interlock smoothly and look the same. However, if the stitches are puckered, the seam is unstable, the thread bunches up, or the stitches are just plain ugly, then there is most likely a problem with incorrect tension on either the top or bottom.
Why does my thread break when sewing elastic?
The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. … Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.
How do you sew elastic without bunching?
Another option is to sew the ends of the elastic together using a scrap piece of fabric. Line up the edges of the elastic over the scrap piece of fabric and then sew a zigzag stitch across the edges 2 or 3 times. This will eliminate any bulging that may occur from overlapping the elastic.
How do you add elastic to a hem?
How to Sew Elastic to Fabric
- Finish the hem of the garment, if applicable. Mark the seam allowances at the sides of the garment piece. …
- Pin the elastic to the wrong side of the garment, matching the three pins on the elastic and on the fabric. …
- Switch the elastic to the fabric, stretching the elastic between the pins.