If your bobbin does not wind quickly and smoothly when you press on your foot pedal, your bobbin winder might not be fully engaged. This can cause uneven winding. Make sure you push your bobbin pin all the way over or loosen your bobbin wheel completely to engage your bobbin winding mechanism.
Why is my bobbin not spinning?
The main source of birdnesting or looping is improperly inserted or threaded bobbin or running the embroidery machine with no bobbin. A tight bobbin tension, together with highly loose needle thread tension, can cause birdnesting. Flagging occurs when the hoop bounces up and down during sewing.
Why is my bobbin winding slow?
When the bobbin winding becomes slow, stop the machine, otherwise the sewing machine may be damaged. Cut the thread, slide the bobbin winder shaft to the left, and then remove the bobbin from the shaft. Slide the sewing speed controller back to its original position.
What is wrong with my bobbin thread?
There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.
What tension should my sewing machine be on?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.
How do you fix a bobbin?
How to Fix Bobbin Thread Bunching and Other Threading Problems
- Thread the Machine Properly. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle. …
- Change the Needle. …
- Inspect the Bobbin. …
- Clean the Machine.
Why is my sewing machine sluggish?
Lack of lubrication, lint buildup, a worn drive belt or a faulty drive motor can cause the sewing machine to run sluggish. Clean and lubricate the sewing machine regularly (at least yearly) to prevent drive gears from sticking and causing sluggish needle or feed dog movement.
Why is my sewing machine suddenly slow?
A sewing machine typically runs slow because it is jammed or needs lubricate. Besides that, you can check the cord and foot pedal to make sure everything is plugged in properly. Lint can also be the problem.
Why is my sewing machine Birdnesting?
The main source of birdnesting or looping is improperly inserted or threaded bobbin or running the embroidery machine with no bobbin. … A tight bobbin tension, together with highly loose needle thread tension, can cause birdnesting. Flagging occurs when the hoop bounces up and down during sewing.
Why is my thread bunching underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.