Quick Answer: Where do you put the bobbin thread?

Where does the bobbin thread go?

Once you have a wound bobbin, it goes in the machine’s bobbin case to supply the lower thread as your machine sews. To load your bobbin, lift your needle and presser foot to the highest position (your machine will either use a hand wheel or a button for this) and remove the bobbin cover.

Do you put the bobbin thread through the needle?

Draw up the Bobbin Thread

After you get the top thread prepared and through the eye of the needle, you need to draw the bobbin thread up through the needle plate. The steps are similar whether your bobbin is front-loading or top-loading. Safety: The needle is sharp.

Does bobbin thread go through presser foot?

The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. … Pull up the bobbin thread, pass it under the presser foot and pull it about 10 cm (4 inches) toward the back of the machine, making it even with the upper thread. Reattach the bobbin cover.

Why isn t my sewing machine catching the bobbin thread?

Why won’t my machine pick up the bobbin thread? … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. Now, it’s time to draw up your bobbin thread.

IT IS INTERESTING:  Best answer: Is it hard to learn to use sewing machine?

Can I sew without a bobbin?

You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.

Can you sew with bobbin thread?

A quality bobbin thread can be almost as strong as normal sewing thread. Regular weight sewing thread would be used in almost all sewing, but bobbin thread is a welcome addition to your sewing basket when the need arises.

How much thread does a bobbin hold?

Have you ever wondered how much thread a bobbin can hold? I have and I feel I get more using Aurifil 50 ct. As it turns out, the tension and thread weight can make the amount vary but this site did an actual experiment and they say 60 yards.

What is the spool for the lower thread?

This is the spool for the bottom thread, and is found in the lower part of your sewing machine. On some sewing machines, the bobbins are front-loading, meaning you insert them through the front of the machine. On other sewing machines, the bobbin is drop-in, so the bobbins are inserted through the top of the machine.

Do you thread a sewing machine with the presser foot up or down?

If the presser foot is up when you thread, your thread will slide right between the discs and then, as you sew, it will be properly regulated by your machine. If you thread your machine with your foot down, the thread will most likely not slide between the tension discs.

IT IS INTERESTING:  Why is my top thread not sewing?
Needlewoman