Quick Answer: What do you do when your sewing machine needle breaks?

When cleaning a sewing machine bobbin area, if the bobbin case is not replaced in the correct location, the needle can hit the bobbin case and break. If this happens, take everything back out of the bobbin area, inspect the bobbin case of nicks, and insert a new needle.

Why am I breaking needles on my sewing machine?

There could be several reasons why the needle keeps breaking. Make sure the needle is correctly inserted with the flat side facing the back and pushed up into the machine as far as possible. The needle could have been damaged or bent. … The combination of needle size, thread size and fabric is incorrect.

What is the remedy for needle breaking?

Needle Thread Breakage

Cause Remedy
Thread fraying at needle. Use finer thread or coarser needle, as appropriate.
Excessive needle heat; groove or eye blocked with melted fabric. Improve the fabric finish. Change to a better needle, style and finish. Apply needle lubricant via thread. Use a needle cooler.

Can you fix a broken needle?

Repairing the needle:

You are going to need some superglue and some needle paint to repair it. To make it look better, you will need a razor to cut off the excess glue. What you want to do is put a dab of superglue on one of the broken ends. Then hold them together until it sets for a minute.

IT IS INTERESTING:  Do sew in weaves damage hair?

When should I replace my sewing machine needle?

It is recommended that you change your needle after every 3 full bobbins used or every 2 pre-wound bobbins used. It is also recommended that you change the needle after each project or if using a fabric that naturally dulls the needle such as leathers or heavy fleece.

What is the strongest sewing machine needle?

Sewing Machine Needle Sizes

  • The American system uses 8 to 19, 8 being a fine needle and 19 being a thick heavy needle.
  • European sizes range from 60 to 120, 60 being a fine needle and 120 being a thick heavy needle.
  • Either way, the higher the number, the thicker/heavier the needle.

How can we avoid needle from breaking?

When pushing or pulling at the fabric while sewing the needle is dragged out of position, causing it to break. Use your hands to guide the fabric so it is fed through your machine, but don’t push or pull. As an example, use a scrap of fabric and sew a couple of stitches without using your hand to guide the fabric.

What is the first step of a sewing machine needle breaks?

Anyone who sews regularly will testify to the irritation caused when a sewing machine needle keeps breaking, interrupting the sewing process.


Heavy 16/100
Very Heavy 18/110
Extra Heavy 20/120