How do you match stripes when sewing pants?

First, match up the stripes at each end of your seam and pin them accurately together. Then, work your way along the seam pinning every stripe for wide stripes and every other stripe or every 2nd stripe for narrower stripes.

How do you match vertical stripes on fabric?

Tutorial: How to Match Plaids and Stripes

  1. Aligning plaid and stripe fabric can be tricky and time consuming. …
  2. Lay out fabric in one layer. …
  3. Cut out pattern piece.
  4. Turn over the piece you just cut. …
  5. Flip the pattern piece. …
  6. Place pattern piece on a large sheet of paper. …
  7. Lightly score the line and fold the paper over.

How do you match vertical stripes?

Ideally all vertical seams should have matched horizontal stripes, but that’s not always possible, depending on the styling. All horizontal seams should have matching vertical stripes. Match stripes at center front and center back openings, side seams and the front armhole of set-in sleeves.

How do you match patterns when sewing?

Lay your fabric out double thickness, right sides together. Align the selvedges, carefully matching the pattern between top and bottom layers. Fold back the top layer of the fabric about half way up. Check to make sure the pattern on the two layers is still aligned and matching.

IT IS INTERESTING:  How do you maintain a sew in?

What pattern goes with stripes?

What patterns go with stripes? Great news: Stripes are basically a neutral so they go with everything (we promise). Put stripes with floral, stripes with plaid, stripes with damask, stripes with polka dots, stripes with leopard print — anything goes.

How do you cut fabric with a repeat pattern?

Follow these steps in cutting out:

  1. Lay the fabric with the pattern at the top on a flat surface.
  2. Get the measurement of the length in the selvedge and put a pin.
  3. Measure the specific number of repeats then mark them using a pin.
  4. Cut the fabric at correct angles from each mark to the selvedge.

How do you match diagonal seams?

How to Match Diagonal Seams When Piecing Your Quilt

  1. Mark your seam allowance Along the edge you want to stitch. …
  2. Rotate your piece and mark the ends. …
  3. Repeat on the opposite piece. …
  4. Layer your pieces right sides together and pin. …
  5. Stitch and press.


What is a fold fabric?

The Fold in the Fabric

Carefully refold the fabric for cutting, following the grain. Fabric is usually folded right sides together for cutting. The only time it is cut right side out is if it has a design that must be taken into account and that does not show through to the wrong side.

How much extra fabric do I need to match a pattern?

Because plaids and stripes require exact placement of the pattern pieces, you almost always need a little extra fabric. The rule of thumb is that for small plaids, get at least an extra 1/2 yard, and for large plaids go with up to an full extra yard.

IT IS INTERESTING:  How will you maintain good working posture while sewing?

How do you match a pocket pattern?

Here’s how to do it:

  1. Transfer pocket placement dots to front of shirt.
  2. Place pocket pattern on the shirt so dots match.
  3. Trace design of fabric onto tissue ( I marked the “googly eyes” of the crab using a water soluble marker just in case it bled through the tissue and onto the fabric.


Do you have to pattern match?

Unless you’re making clothes or projects with only straight seamlines, it’s impossible to pattern match fully along the length of any curved seams. … Ultimately though, pattern matching is down to personal taste. If you don’t care, then you really don’t have to do any matching at all, and that’s totally OK!