Why can’t I get the bobbin thread to come up?
Why won’t my machine pick up the bobbin thread? … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. Now, it’s time to draw up your bobbin thread.
Where does the bottom bobbin thread go?
Once you have a wound bobbin, it goes in the machine’s bobbin case to supply the lower thread as your machine sews. To load your bobbin, lift your needle and presser foot to the highest position (your machine will either use a hand wheel or a button for this) and remove the bobbin cover.
Does the bobbin thread go through the needle?
Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
Does thread go under presser foot?
Double check to make sure the thread is through the tension properly. Once you’ve threaded the needle, put the thread straight back (but not under the presser foot). Keep the presser foot up, and note that the thread should be fairly easy to pull.
Can I sew without a bobbin?
You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.
Why is my thread looping underneath?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
What tension should my sewing machine be on?
The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing. This should be suitable for most fabrics. If you are doing a zig-zag stitch, or another stitch that has width, then you may find that the bobbin thread is pulled through to the top.