Why is my needle not picking up the bobbin thread?
If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. … Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension.
Why won’t My Brother sewing machine pick up the bobbin thread?
There could be several things that could cause the machine not to pick up the bobbin thread. The upper thread could be tangled. Remove the thread completely from the machine. The correct size spool cap should be used for the size of the thread spool.
What is wrong with my bobbin thread?
There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.
How do you adjust the tension on a bobbin thread?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
Why is my machine sewing gathers?
Friction between layers of materials. When sewing, the feed dog grips the fabric to help the material pass through the machine. … You need to re-sew the affected parts, or use a suitable presser foot to lower friction. Friction between layers of fabric built up during sewing may cause seam gathering/puckering.
Why does my sewing machine cut the thread?
The upper thread tension could be set too tight. Set the tension to the best thread tension setting or less. Make sure the spool of thread is installed correctly using the correct size spool cap for the size of spool. … Check that the bobbin is wound so that it about 80% full and that the thread is evenly wound.
Does the bobbin thread go through the needle?
Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.
How do I thread a bobbin?
How to Thread a Bobbin
- Start with an empty bobbin and a spool of thread. …
- Begin passing thread into the bobbin winder. …
- Secure the thread. …
- Insert the bobbin onto the bobbin winder shaft. …
- Secure the bobbin. …
- Begin winding. …
- Confirm that your bobbin is tightly wound. …
- Load your wound bobbin into its case.
Are all Singer Bobbins the same?
Bobbin Tips & Hints
Use only bobbins that are the same class/style as those that come with your machine – don’t substitute! SINGER® branded bobbins are recommended for best results.