What causes thread to bunch up underneath when sewing?
A: Looping on the underside, or back of the fabric, means the top tension is too loose compared to the bobbin tension, so the bobbin thread is pulling too much top thread underneath. By tightening the top tension, the loops will stop, but the added tension may cause breakage, especially with sensitive threads.
How do I stop puckering when sewing?
Set the needle thread tension to be as light as possible while achieving a balanced stitch at the same time. This will reduce the amount of puckering while the thread is stretched and improve the sewability. Use a high-quality sewing thread with a low-friction lubricant applied to it.
What should my tension be on my sewing machine?
As the bobbin thread tension is factory-set and wouldn’t usually be adjusted for normal sewing. So we’ll be talking only about the top thread tension since that’s where you’d usually make the adjustments. The dial settings run from 0 to 9, so 4.5 is generally the ‘default’ position for normal straight-stitch sewing.
How do you fix bobbin tension?
To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.
What tension should Jeans be set at?
Tension is ideal up to 6, but is too high after that and pulls the top stitch into a flat line. Regular thread, bobbin thread view. The bobbin stitches clear up around 6 but don’t improve much after that.